PEUGEOT

306 PLIP PROGRAMMING

1. Turn the Ignition switch to the accessory position using the key without the remote plip attached.

2. Hold the Plip key close to the central locking receiver mounted in the roof console.

3. Press the large plip button and then the small plip button on the remote.

4. Repeat for second Plip key if required.

5. Turn the ignition OFF.

6. After 5 seconds the Plip should now operate.

The above works on Infra-red keyfobs only. To distinguish between the different types click here.

More Info on Peugeot Remote Control Key Fobs